Cleaning a Scotsman Ice Machine

Most ice machines need to be serviced on a regular basis in order to function at their best. As a result, according to the Scotsman Ice Unit cleaning handbook, you must keep your machine in good working order to ensure its longevity.

Scotsman Ice Machine Cleaner is a product that is used to clean ice machines.

Remove all of the ice from the trash before beginning any Scotsman Ice Machine service cleaning. Remove the front panel and push and release the Harvest button, according to the Scotsman Ice Machine cleaning handbook. Wait for the Harvest cycle to complete for the machine to cease working completely once you release the Harvest button. After that, you'll remove the evaporator lid and press and release the Clean button.

The Clean indication light will begin to flicker once you press the Clean button, and the pump will resume. 12 ounces of Scotsman Ice Machine Cleaner can now be poured into the reservoir water. Remember to replace the evaporator lid on the machine. The cleaning solution should circulate for around 10 minutes, according to the Scotsman Ice Machine cleaner instructions.

You'll push and release the Clean button after 10 minutes. The Clean button light will turn on, signaling the start of the rinsing procedure. The rinse cycle is required because it removes all of the Scotsman Ice Machine Cleaner from the water system. This rinsing process should take around 20 minutes. Push and release the Freeze button while making sure the evaporator lid is tight. After that, you'll replace the front panel on the machine and fasten it in place.

Descaling Process for Scotsman

You must descale the Scotsman Ice Machine twice a year, according to the Scotsman Ice Machine components handbook. The first step in descaling the machine is to press and release the On/Off button. The machine button will flicker for a minute after it is removed, and then the entire device will shut off. After the machine is off, you need to get rid of all of the ice from the bin.

The metal bar will then be removed flush with the bin wall. After that, you must take off the rear panel. Loosen the thumbscrews, lower the panel, and pull it out from the front. Push the tab to raise and remove the cap from the reservoir.

After removing the cover, push the On/Off lever upwards to turn off the water. After you've turned off the water, you'll empty the system by pulling the drain plug. Pour half of the Scotsman Ice Machine Cleaner bottle into the reservoir next.

Extra Descaling Procedures

After the liquid has been poured in, press and holds the On/Off and Clean Reset buttons for around five seconds. The compressor will come back on after the auger motor has operated for around 10 minutes. Continue to pour in the remaining solution while the compressor is working, keeping the level at 1/2 full. After 40 minutes, the compressor will turn off and the device will continue to generate ice.

Push the On/Off lever to turn the water back on once you've finished putting in the solution. When the cleaning procedure is complete, check sure the drain plug is in place and the reservoir lid and back panel are firmly fastened.

Learn about scotsman ice machine training by visiting etech.us.com